Iron Man Hand

Ever wanted to make your own toys for your kids?  Find unique toys and other personal designs in our marketplace. 

The electronics (not shown) would slowly brighten the LEDs in the palm, then activate the camera flash.

The OpenSCAD files don't seem to be displaying correctly in Cubehero. However, they worked correctly for me (using OpenSCAD version 2014.03). For the glove particularly, it takes a long time to render.

Notes on building The light is made up 8 LEDs and a camera flash. The flash was separated from the rest of the camera electronics. The rest of the flash electronics (as well as a microcontroller to PWM the LEDs and trigger the flash) were in a (somewhat pretty) box mounted to my arm, with a cable running from that box to the glove.

I bought an inexpensive glove, cut a hole in the palm so the cable could be routed through the glove (to hide the wires). I put velcro on the inside of the printed finger tips and the glove finger tips.

Disclaimer I do not own the rights to the Marvel Universe. However, I made this model from scratch, by looking at pictures online.

Good print and enjoy!

​

Iron_Man_Hand by excite