Login/Sign up for a "Wittyer Profile" and upload your content with our easy-to-use tool.
Choose the license that best represents your work between commercial or open source options. Check licences here
For each download, you will receive up to 85% of the net selling price. Check our royalty options here
At Wittystore we only choose quality products for your prints!
Available in Bronze, Copper and Brass, PrimaSelect Metal filament, made in Europe, is a new exciting type of filament which let you take 3D-printing to a new level. This special filament contains 80% metal powder and it is as close to real metals you can come in the filament industry for FDM / FFF printers.
There´s many benefi ts by using metal powder. You will experience a real metal feel when you touch it and it also have that cold feeling that you can have when you touch copper or bronze. When it comes to weight Bronze/Copper/Brass is about 3-4 times heavier than regular PLA which also enhances the feeling of real metal. Thanks to the metal powder there´s also very low shrinkage when printing with this filament
You can use Bronze / Copper / Brass in almost any FDM / FFF midrange printer on the market today and the filament has been tested in a number of different set ups with both Bowden and direct drive printers.
Due to the abrasive nature of metal we recommend that you use a hardened steel nozzle* with this filament. It prints great with a regular brass nozzle also but the wear and tear is bigger and the risk for wearing out your nozzle increases.
Why should I use PrimaSELECT Metal?
Bronze/Copper works great without a heated bed, but if you have it we recommend a setting of 35-60 °C
Post processing is really fun with this filament as you can make it look just like a cast molded model. When the print is done it is looks almost like clay, but then you can use some
techniques to bring out that metal gloss. A rotary tumbler is the easiest way of handling the fi nished print. You can just tumble it for a few hours or until you have the fi nish you are looking for.
You can also use some fine grit sand paper (600) and polish your print to desired fi nish. Polish the model with sand paper and water. The longer you polish, the better the shine. You can finish with some metal polish for that perfect look.
Prima SELECT Metal sticks on BuildTak or glass plate coated with adhesive spray or glue stick.
Prima SELECT Metal is reeled on a transparent spool with 750 g of high quality filament. It´s packed in a sturdy box and packed with silica gel to avoid moister.
The PrimaFilaments factory is equipped with the latest in laser measuring technology to ensure that you will receive a spool of filament with a very tight diameter and roundness tolerance. This in turn makes for a filament that is compatible with most common printers on the market today.