PrimaSelect ABS 1.75mm 750 g Dark Blue Filament

Prima Select ABS (Acrylonitrile Butadiene Styrene) is a material that is widely used in both industry and as filament for 3D Printers. It´s strong, light weight and very durable. The well-known Lego blocks are made from ABS and as you know that is a very high impact resistant piece of plastic and the same goes for parts printed with Prima Select ABS

Prima Select ABS is a very "easy to use" material and has a matte surface finish when printed. This ABS also has limited risk of warping when comparing to other brands of ABS. Prima Select ABS comes in a wide range of vivid colors that are all based on the RAL color system which in turns guarantees that you will get the same color every time you order a new spool.

With Prima Select ABS we have succeeded in making an ABS that are very easy to print with and gives you stunning result every time. This filament has a very high impact strength and are perfect for printing tools, toys and different gadgets. Thanks to the relative high melting temperature (± 103˚C) Prima Select ABS is also suitable for prints that are going to be used in hot environments. If you have a dual hot-end set up and are going to print with support we recommend that you use Prima Select PVA, that bonds well to our ABS and are easy to remove, Prima Select PVA is even soluble in water.

When printing with Prima Select ABS we recommend that you use a heated bed to limit warping and shrinkage. Set your heat bed to ± 90-110˚C for best results.

Prima Select ABS sticks on BuildTak or glass plate coated with adhesive spray or glue stick.

Prima Select ABS is reeled on a transparent spool with 750 g of high quality filament. It´s packed in a sturdy box and packed with silica gel to avoid moister.

Prima Select ABS are available in diameter sizes of 1.75 mm and 2.85 mm.

Our state of the art factory is equipped with the latest in laser measuring technology to ensure that you will receive a spool of filament with a very tight diameter and roundness tolerance. This in turn makes for a filament that is compatible with most common printers on the market today.

Why should I use Prima Select ABS?

• High impact strength
• Easy to use
• Very good layer adhesion
• Higher melting point than PLA
• No hazardous fumes
• Based on RAL color system

• Material ABS
• Diameter 1.75mm
• Tolerance ± 0.05 mm
• Heated build platform required Yes
• Print Temperature 220 - 270 °C
• Melting Temperature 245°C ± 10 °C
• Weight Filament 750 g
• Spool Size 200 x 55 mm 
• Spool Hub Diameter 53 mm